anritsu-meter.com
Home / Technical Guide / Attention of Order
Attention of Order

Some precautions and the product ordering procedures are given below.

CheckTechnical Guide

Thermocouple Type
Type Former Symbol Composing materials
K CA (+) : Chromel
(-) : Alumel
E CRC (+) : Chromel
(-) : Constantan
J IC (+) : Iron
(-) : Constantan
T CC (+) : Copper
(-) : Constantan
R (PR) (+) : Platinum / 13% Rhodium
(-) : Pure Platinum

Standard Anritsu Meter products are designed to use Type-K or Type-E thermocouples.
Note that the main thermometer unit must be connected to a probe of the designated type for accurate temperature measurements.
Anritsu Meter can also manufacture certain models for use with Type-J or Type-T thermocouples. Please contact us for more information.

 
Connection

Standard Anritsu Meter products are designed to use either the ASP or ANP plug.
Note that the main thermometer unit and probe must have the same connector types.
Anritsu Meter can also manufacture certain probe models with the following connector types. Please contact us for more information.

*WA, WC, and WT are made of generaliy available electrical materials.
Note that temperature changes in these parts may result in measurement errors.
Cable Type

For information on standard probe compensating lead wires (cords), please refer to the probe product pages.
Anritsu Meter can also manufacture certain probe models with the following compensating lead wires. Please contact us for more information.

Type : K
Model Outer diameter
Conductor
Sheath Material Heat
Resistant
Resistance Feature
TS-K φ2.3mm
7 / 0.1 × 2
Silicone rubber 240°C 18Ω / m Thin, Flexible
TF-K φ2.3mm
7 / 0.1 × 2
Teflon 230°C 19Ω / m Resistant to chemicals
TC-K φ4.0mm
14 / 0.1 × 2
Silicone rubber 240°C 9Ω / m Flexible
TCG-K φ4.5mm
14 / 0.1 × 2
Silicone rubber with Stainless steel 240°C 9Ω / m Flexible, Resistant to external damage
GW-K φ2.3mm
0.32 × 2
Glass fiber 300°C 11Ω / m Highly resistant to heat
SG-K φ3.0mm
0.65 × 2
Glass fiber with Stainless steel 400°C 3Ω / m Moderate hardness
Highly resistant to heat
Resistant to external damage
TPC-K φ3.3mm
14 / 0.1 × 2
Polyurethane 110°C 18Ω / m Coiled cord
Contraction /
extension range : 0.3 to 1.5m
Type : E
Model Outer diameter
Conductor
Sheath Material Heat
Resistant
Resistance Feature
TS-E φ2.3mm
7 / 0.1 × 2
Silicone rubber 240°C 22Ω / m Thin, Flexible
TF-E φ2.3mm
7 / 0.1 × 2
Teflon 230°C 22Ω / m Resistant to chemicals
TC-E φ4.0mm
14 / 0.1 × 2
Silicone rubber 240°C 11Ω / m Flexible
TCG-E φ4.5mm
14 / 0.1 × 2
Silicone rubber with Stainless steel 240°C 11Ω / m Flexible, Resistant to external damage
GW-K φ2.3mm
0.32 × 2
Glass fiber 300°C 14Ω / m Highly resistant to heat
SG-E φ3.0mm
0.65 × 2
Glass fiber with Stainless steel 400°C 3.6Ω / m Moderate hardness
Highly resistant to heat
Resistant to external damage
TPC-E φ3.3mm
14 / 0.1 × 2
Polyurethane 110°C 22Ω / m Coiled cord
Contraction /
extension range : 0.3 to 1.5m
*[14.0 × 2] in the conductor column indicates that the cord contains two conductor wires (one pair).
Each conductor wire is a twisted wire composed of 14 0.1-mm-diameter wire strands.